Model year record

2012 BMW 320i recalls & problems

The 2012 BMW 320i has 3 safety recalls and 3 owner complaints on file with NHTSA. The most-reported problem area is air bags (2 complaints).

Recalls3safety recalls

Complaints3filed by owners

Crashes · fires0 · 0reported in complaints

Injuries · deaths0 · 0reported in complaints

Safety recalls

Exterior lightingAug 17, 2015

Exterior lighting

Recall 15V5200007,727 vehicles

Problem: BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon vehicles manufactured March 21, 2013, to March 17, 2015, 2014-2015 328d, 328xd vehicles manufactured June 28, 2013, to April 21, 2015, and 2014-2015 328xd Sports Wagon vehicles manufactured July 5, 2013, to April 21, 2015. The affected vehicles may have been programmed with new software that inadvertently makes the front side marker lights inoperative in conjunction with the parking lights or the headlights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: If the side marker lights do not illuminate, the vehicle may be less visible at night, increasing the risk of a crash.
Fix: BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service at 1-800-525-7417 or by email at CustomerRelations@bmwusa.com.

Service brakes, hydraulicOct 7, 2014

Power assist › Vacuum › Hoses, lines/piping, and fittings

Recall 14V6270008,988 vehicles

Problem: BMW of North America LLC (BMW) is recalling certain model year 2014 BMW 328i xDrive Sports Wagon, 2012-2014 BMW 320i Sedan, 328i Sedan, 320i xDrive Sedan, 328i xDrive Sedan, 2012-2013 BMW 528i Sedan, 528i xDrive Sedan, 2013-2014 BMW X1 sDrive28i, X1 xDrive28i Sports Activity Vehicle, 2013-2014 BMW X3 xDrive28i Sports Activity Vehicle, 2012-2014 BMW Z4 sDrive28i Roadster, and 2014 BMW 428i Coupe, and 428i xDrive Coupe. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail. Note: This recall is an expansion of recall 13V-454.
Risk: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Fix: BMW will notify owners, and dealers will install a locking ring in the camshaft to retain the camshaft seal disk in the proper location, free of charge. The recall began on December 2, 2014. Owners may contact BMW customer service at 1-800-525-7417.

Components: Service brakes, hydraulic › Power assist › Vacuum › Hoses, lines/piping, and fittings; Service brakes, hydraulic › Power assist › Vacuum

Service brakes, hydraulicSep 26, 2013

Power assist › Vacuum › Hoses, lines/piping, and fittings

Recall 13V45400076,191 vehiclesopened after NHTSA action (ODI)

Problem: BMW of North America LLC (BMW) is recalling certain model year 2012-2014 320i, 328i, 320i xDrive, and 328i xDrive sedans; model year 2014 328i xDrive Sports Wagons; model year 2012-2013 528i and 528i xDrive sedans, model year 2013-2014 X1 sDrive28i and X1 xDrive28i vehicles and model year 2012-2014 Z4 sDrive28i roadsters. Due to insufficient lubrication, the vacuum pump that supplies brake power assistance may fail.
Risk: A failure of the brake vacuum pump results in a reduction in braking power that could increase the risk of a crash.
Fix: BMW will notify owners, and dealers will modify the vehicles to prevent insufficient vacuum pump lubrication, free of charge. The safety recall began on January 31, 2014. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

Components: Service brakes, hydraulic › Power assist › Vacuum › Hoses, lines/piping, and fittings; Service brakes, hydraulic › Power assist › Vacuum

Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.

What owners report

Problem area	Complaints	Typical mileage*
Air bags	2	—
Electrical system	1	—
Electronic stability control (esc)	1	—
Exterior lighting	1	—

*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.

Recent owner complaints

Air bags
TL* THE CONTACT OWNS A 2010 BMW 320I N/A. THE CONTACT STATED THAT WHILE DRIVING AT 40 MPH, THE AIR BAG WARNING LIGHT ILLUMINATED AND WOULD REMAIN ILLUMINATED. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 130,000.
Feb 21, 2017 · 130,000 miles
Air bags
TL* THE CONTACT OWNS A 2011 (NA) BMW 320I. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V346000 (AIR BAGS); HOWEVER, THE PART TO DO THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE.
Sep 9, 2016
Electrical system
HEAD LIGHTS FOR NEWER CARS ARE TOO BRIGHT AND BLIND DRIVERS APPROACHING FROM THE OPPOSITE DIRECTION. *TR
Dec 1, 2011

Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.

NHTSA defect investigations

Loss of power assist brakingClosedLed to recall 13V454000
In a letter dated September 26, 2013, BMW Group submitted a safety recall notice to NHTSA identifying a defect condition in the vacuum pump oil supply that may result in loss of power assist braking in 76,191 model year (MY) 2012 through 2014 BMW 3-Series, 5-Series, X1 SAV, X3 SAV, and Z4 vehicles equipped with 4-cylinder engines (NHTSA Recall 13V-454).According to BMW, movement of the seal disk within the camshaft may result in blocking of the oil supply to the vacuum pump, resulting in improper pump operation and loss of power assist braking.On July 11, 2013, BMW initiated a change to the camshaft geometry that prevented the seal disk from blocking the oil port.BMW has not received any braking complaints related to loss of power assist after the design change was implemented in production.The owners of all affected vehicles will be contacted by mail and asked to take their vehicle to…
PE13030 · opened Sep 6, 2013 · closed Oct 25, 2013