Model year record
1999 BMW M Roadster recalls & problems
The 1999 BMW M Roadster has no safety recalls on file with NHTSA, and 18 owner complaints. The most-reported problem area is structure (9 complaints).
Safety recalls
No safety recalls have been filed for the 1999 BMW M Roadster.
Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.
Fuel economy
M Roadster
| City / highway | 17 / 24 mpg |
|---|---|
| Fuel | Regular Gasoline |
3.2 L · 6 cyl · Manual 5-spd · Rear-Wheel Drive · about $3,350/year to fuel
EPA estimates from fueleconomy.gov for each engine and transmission sold. Annual cost is the EPA's estimate for 15,000 miles a year at its current fuel and electricity price assumptions. Your results will vary.
What owners report
| Problem area | Complaints | Typical mileage* |
|---|---|---|
| StructureFrame and members; Body | 9 | 82,302 mi |
| Power trainDriveline › Differential unit; Driveline | 5 | 75,000 mi |
| SuspensionRear | 5 | 78,509 mi |
| Air bagsFrontal › Sensor/control module | 2 | — |
| VisibilityRearview mirrors/devices › Exterior | 1 | — |
| Seats | 1 | — |
| Unknown or other | 1 | — |
*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.
Recent owner complaints
- Suspension
OVER SEVERAL MONTHS I HEARD INCREASING NOISE FROM THE REAR OF MY CAR. WHEN I TOOK IT TO MY MECHANIC HE FOUND THAT THE ENTIRE CROSSMEMBER THAT HOLDS THE DIFFERENTIAL TO THE SUBFRAME HAD PULLED LOOSE FROM THE TRUNK. THE CAR COULD NOT BE SAFELY DRIVEN, MY BODYSHOP SUGGESTED I SEND IT TO THE BMW DEALER IN CHARLOTTE NC. THEY KEPT MY CAR FOR ABOUT 3 WEEKS AND FIXED IT. NOW 5 YEARS AND 10K MILES HAVE PASSED AND THE SUB-FRAME MOUNT IS PULLING LOOSE AGAIN, THE WELDS POP OUT AND THE NOISE HAS STARTED. IT MAKES THE CAR DANGEROUS TO DRIVE AND IMPOSSIBLE TO SELL.
- Suspension
TOOK VEHICLE IN FOR ENGINE MAINTENANCE AND ASKED THEM TO ADDRESS SQUEAKS AND RATTLES. ON INSPECTION IT WAS FOUND THAT THE REAR CROSSMEMBER HAD ALMOST COMPLETELY SEPARATED FROM THE UNIBODY AND THE MOUNT HOLDING THE DIFFERENTIAL IN HAD ONLY 1/4 IN OF 4 INCHES HOLDING THE AFT END OF THE DIFFERENTIAL. COMPLETE FAILURE COULD HAVE CAUSED A CATASTROPHIC CHAIN OF EVENTS CAUSING A CRASH AND POSSIBLE FATALITIES. LOOKING ON LINE I FOUND NUMEROUS FAILURES OF THE SAME KIND RESULTING FROM METAL FATIGUE BROUGHT ON BY FAULTY DESIGN. AT LEAST THIS WAS THE OPINION OF OTHER PEOPLE WITH THE SAME FAILURE. ONE PERSON HAD A PHDS IN METALLURGY.
- Structure › Frame and members › Underbody shields
WHILE DRIVING THE CAR, THE REAR END FAIL AND BEGAN TO DRAG. AFTER GETTING THE CAR TOWED TO THE SHOP, IT WAS NOTED THE REAR END SUBFRAME WELDS CAME LOSE. AFTER CONTACTING THE INSURANCE COMPANY THEY TOTALED THE CAR OUT. I BOUGHT THE CAR BACK AND MADE REPAIRS TO THE CAR THAT COST ME $4000.00. *TR
- Unknown or other
CAR WAS PURCHASED NEW IT NOW HAS A BROKEN SUBFRAME. IT BEGAN AS A THUMPING NOISE IN THE REAR OF THE CAR. I THOUGHT MAYBE IT NEEDED STRUTS. AFTER LOOKING CLOSER I SAW A TEAR IN THE FRAME. I TOOK IT TO A BODY SHOP FIRST AND THEY HAD NEVER SEEN ANYTHING LIKE IT. SO I CONTACTED BMW AND THEY TOLD ME TO TAKE IT TO A LOCAL DEALER. AFTER THEY INSPECTED IT THEY TOLD ME IT WOULD TAKE $10,000 PLUS TO FIX IT. THE REAR END IS BASICALLY SITTING ON THE EXHAUST WHICH IS THE ONLY THING HOLDING IT TO THE CAR. SEVERAL SPOT WELD HAVE FAILED THIS IS COMMON AMONG ALL BMW Z-3 CARS. MUCH LIKE THE 3 SERIES IN THE SAME YEARS ( 1999 - 2006 CLASS ACTION LAW SUIT) THEY ALL NEED TO BE RECALLED BEFORE SOME ONE GETS HURT.…
- Structure › Frame and members
TL* THE CONTACT OWNS A 1999 BMW M ROADSTER. THE CONTACT HEARD A NOISE COMING FROM THE REAR OF THE VEHICLE. THE VEHICLE WAS TOWED TO THE DEALER WHERE IT WAS INSPECTED AND THE CONTACT WAS INFORMED THAT THE SUBFRAME HAD FRACTURED. THE MANUFACTURER WAS AWARE OF THE FAILURE. NO REPAIRS WERE PERFORMED. THE CURRENT AND FAILURE MILEAGE WAS 135,000. UPDATED 09/19/11 *BF THE MECHANIC INFORMED THE CONSUMER THE PROBLEM WAS DUE TO FATIGUE. THE SHEET METAL WAS TOO THIN AND THE BOX BEAM WAS TOO SMALL. UPDATED 11/04/11
- Structure › Frame and members
THE DIFFERENTIAL MOUNT FOR THE CAR HAS TORN LOOSE FROM THE TRUNK FLOOR IT IS WELDED TO. THERE WAS NO ACCIDENT BECAUSE I FOUND THIS DEFECT BEFORE ONE OCCURRED. HAD I NOT FOUND THIS DEFECT, THE ENTIRE REAR AXLE COULD HAVE COME LOOSE FROM THE VEHICLE WHILE DRIVING IT. *TR
- Structure › Frame and members
NOISE DEVELOPING UNDER REAR UNDERCARRIAGE. *TR
- Structure › Body
DIFFERENTIAL SUBFRAME CAUSES WELD FAILURES APPEARING IN TRUNK AND OTHER BODY LOCATIONS. I BELIEVE THAT THIS IS CAUSED BY A DEFECT THAT GENERATES A SIGNIFICANT SAFETY HAZARD. THIS DEFECT IS BEING REPORTED BY AN INCREASING NUMBER OF Z3 OWNERS OVER TIME. *TR
Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.