Model year record
1993 Jeep Wagoneer recalls & problems
The 1993 Jeep Wagoneer has no safety recalls on file with NHTSA, and 3 owner complaints. The most-reported problem area is engine and engine cooling (3 complaints).
Safety recalls
No safety recalls have been filed for the 1993 Jeep Wagoneer.
Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.
What owners report
| Problem area | Complaints | Typical mileage* |
|---|---|---|
| Engine and engine coolingEngine; Exhaust system › Manifold/header/muffler/tail pipe | 3 | — |
| Power trainAutomatic transmission | 1 | — |
| Fuel system, gasolineCarburetor system | 1 | — |
| Latches/locks/linkagesDoors › Latch | 1 | — |
*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.
Recent owner complaints
- Latches/locks/linkages › Doors › Latch
THE DEFECTIVE DOOR MECHANISM BROKE, CAUSING DRIVER'S DOOR NOT CLOSE PROPERLY, COULD CAUSE OCCUPANT MAY FALL OUT OF THE VEHICLE. DEALER CLAIMS THIS IS A CURRENT PROBLEM. PLEASE PROVIDE DETAILS. *AK
- Fuel system, gasoline › Carburetor system
INTAKE MANIFOLD FAILED, CAUSNG OIL LEAK.
- Power train › Automatic transmission
TRANSMISSION REPLACED DUE TO CONTINUOUS FLUID LEAK, ALSO SHUDDERED IN OVERDRIVE.
Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.
NHTSA defect investigations
- REAR AXLE SHAFT SEPARATIONClosed
THIS INVESTIGATION WAS OPENED TO EXAMINE THE FAILURE MODE AND THE RISK TO MOTOR VEHICLE SAFETY POSED BY ALLEGATIONS OF REAR AXLE SEPARATIONS.THE REAR AXLE SHAFT AND HOUSING DESIGN IS TYPICAL OF THOSE IN WHICH THE WEIGHT OF THE VEHICLE IS CARRIED ON THE AXLE HOUSING.THE LEFT AND RIGHT AXLE SHAFTS, SUPPORTED BY ROLLER BEARINGS, ARE SITUATED INSIDE THE AXLE HOUSING.THE INBOARD SPLINED END OF THE AXLE SHAFT RECEIVES POWER TRANSMITTED FROM THE DIFFERENTIAL ASSEMBLY, PROVIDING TORQUE TO THE REAR WHEELS.THE ALLEGATIONS ARE THAT THE AXLE SHAFT FAILS, RESULTING IN THE SEPARATION OF A WHEEL AND AXLE HUB ASSEMBLY OR THE ENTIRE AXLE SHAFT AND WHEEL ASSEMBLY, DEPENDING ON THE LOCATION OF THE AXLE SHAFT FAILURE.AS IDENTIFIED BY CHRYSLER, THE SUBJECT REAR AXLES ARE DANA 35C AND 35CM MODELS, WHICH HAVE BEEN USED ON THE SUBJECT VEHICLES SINCE THE 1990 MODEL YEAR.A SAFETY DEFECT TREND WITH RESPECT TO THE…