Model year record
The 1993 Toyota Toyota Truck has 1 safety recall and 16 owner complaints on file with NHTSA. The most-reported problem area is service brakes, hydraulic (8 complaints).
Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.
| Problem area | Complaints | Typical mileage* |
|---|---|---|
| Service brakes, hydraulicFoundation components › Disc › Rotor; Foundation components | 8 | — |
| StructureFrame and members; Body › Door | 5 | — |
| VisibilityRearview mirrors/devices › Interior; Rearview mirrors/devices | 3 | — |
| Engine and engine coolingEngine › Gasoline; Engine | 3 | — |
| TiresTread/belt; Sidewall | 3 | — |
| Unknown or other | 1 | — |
| Seat beltsFront › Webbing | 1 | — |
| Power trainManual transmission | 1 | — |
| Parking brake | 1 | — |
*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.
SEVERE RUST PERFORATION OCCURRING IN FRAME OF VEHICLE ( 1993 TOYOTA PICK-UP) TOYOTA CUSTOMER SERVICE INFORMED ME NOTHING COULD BE DONE FOR THIS YEAR OF VEHICLE.( COMPLAINT REF. NO. 1001130208 FILED WITH TOYOTA CUSTOMER SERVICE ON 1/21/10 ) ----PROGRAM IS IN PLACE FOR 1995 - 2005 TRUCKS WITH SAME PROBLEM. JUST WANTED TO INFORM THE NHTSA THAT EARLIER MODEL TRUCKS ARE EXPERIENCING THE SAME ISSUES. *TR
TRUCK FRAME IS RUSTED THROUGH. BEING REINFORCED WITH STEEL PIECES. THE CAB AND TRUCK BED WOBBLE WHILE BEING DRIVEN. BRAKE LINES ARE RUSTED ALSO. *TR
MY FRAME RUSTED THROUGH ON THE RIGHT SIDE AND THE FRONT AXLE BRACKET SEPARATED FROM THE FRAME. THE VEHICLE DROVE ERRATICALY UNTIL THE BRACKET CAME TO REST IN THE HOLE IT LEFT IN THE FRAME. UPON INSPECTION THE FRAME IS RUSTED FROM THE BRACKET FORWARD TO UNDERNEATH THE PASSENGER SEAT. *JB
WHILE TRAVELING HOME FROM WORK I WENT TO USE THE BRAKES, THERE WERE NO BRAKES AS THE PEDAL WENT TO THE FLOOR. UPON INSPECTION OF THE VEHICLE I FOUND A METAL BRAKE LINE ON THE PASSENGER SIDE ENGINE COMPARTMENT WAS ASSEMBLED SO AS IT MADE DIRECT CONTACT WITH THE METAL FUEL PRESSURE RETURN LINE. THE TWO LINES SUBSEQUENTLY WORE A GROOVE IN EACH OTHER WITH THE BRAKE LINE WEARING THROUGH THUS LETTING ALL THE APPLIED BRAKING PRESSURE TO ESCAPE FROM THE WORN HOLE IN THE LINE. I WAS AN ASE CERTIIFIED AUTO TECHNICIAN FOR MANY YEARS IN MY LIFE AND IT IS MY PROFESSIONAL DIAGNOSIS THAT THE VEHICLE WAS ASSEMBLED THIS WAY FROM THE FACTORY. THE FUEL PRESSURE RETURN LINE SHOWS SEVERE WEAR AND COULD PROVE TO…
THE PASSENGER SIDE DOOR HANDLE FAILED. NLM
SIDEWALLS OF ALL TIRES ARE PEELING OFF. WHITE IS EXTREMELY VISIBLE BEHIND BLACK SIDEWALL. TIRES HAVE LESS THAN 30000 MILES ON THEM. THESE TIRES WERE MADE IN THE DECATOR PLANT AND HAVE THE VD DESIGNATION IN THE DOT SQUARE. ALSO THERE ARE ENORMOUSE CRACKS IN THE TREAD SECTION OF THE TIRES. AGAIN THIS IS ON ALL TIRES. THE TIRE SIZE IS 32X11.5X15 MOUNTED ON 10X15 ALUMINUM RIMS ANY INFO YOU MIGHT PROVIDE WOULD GREATLY BE APPRECIATED.( DOT NUMBER: VD TIRE SIZE: 32X11.5X15 )
TIRE TREAD SEPARATED FROM TIRE CAUSING DAMAGE TO THE WHEEL WELL AND BODY/ AFTER INCIDENT OCCURED THE TIRE CONTINUED TO RETAIN FULL AIR PRESSURE AND STILL DOES TO THIS DATE. THE TRUCK IS IN THE REPAIR SHOP DAMAGE IS MY ESTIMATED COST( DOT NUMBER: 7B8PUB TIRE SIZE: 30X9.50R15 )
I WAS DRIVING DOWN THE ROAD, I LOST CONTROL OF MY VEHICLE AND CRASHED INTO A CONCRETE WALL WITH THE RIGHT REAR END OF MY VEHICLE. I WAS SEAT BELTED IN MY VEHICLE. WHEN THE VEHICLE CAME TO A FINAL REST, THEN IS WHEN MY SEAT BELT POPPED (UNLATCHED). I DID NOT INJURY MY BODY. HOWEVER, I DO NOT FEEL CONFORTABLE KNOWING THAT MY BELT DID NOT HOLD ME. WILL IT HOLD ME, GOD FORBID THAT I HAVE ANOTHER COLLISION GOING FASTER THAN 55 MPH?( DOT NUMBER: )
Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.