Model year record

2008 Mercury Milan recalls & problems

The 2008 Mercury Milan has 5 safety recalls and 451 owner complaints on file with NHTSA. The most-reported problem area is air bags (212 complaints).

Recalls5safety recalls

Complaints451filed by owners

Crashes · fires22 · 1reported in complaints

Injuries · deaths8 · 1reported in complaints

2 recalls for this model year carry an NHTSA do not drive advisory. Check your VIN at nhtsa.gov/recalls.

Safety recalls

Air bagsMar 10, 2021

Frontal › Driver side › Inflator module

Recall 21V1580002,602,668 vehiclesopened after NHTSA action (ODI)

Problem: Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Fix: Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.

Service brakes, hydraulicDec 18, 2019

Antilock/traction control/electronic limited slip › Control unit/module

Recall 19V904000600,166 vehiclesopened after NHTSA action (ODI)

Problem: Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
Risk: If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Fix: Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.

Air bagsJan 10, 2017

Frontal › Passenger side › Inflator module

Recall 17V024000654,695 vehiclesopened after NHTSA action (ODI)

NHTSA advisory: do not drive affected vehicles until repaired.

Problem: Ford Motor Company (Ford) is recalling certain 2012 Ford Fusion and Mustang and Lincoln Zephyr and MKZ vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain 2009 Ford Ranger, Edge, Fusion and Mustang, Lincoln MKX, MKZ and Zephyr and Mercury Milan vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, Ford is recalling certain 2007-2008 Ford Ranger, Edge and Lincoln MKX, 2006-2008 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ, 2005-2008 Ford Mustang and 2005-2006 Ford GT vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Fix: Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Interim letters informing owners of the recall and that parts are not yet available began mailing March 1, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.

Air bagsMay 31, 2016

Frontal › Passenger side › Inflator module

Recall 16V3840001,892,343 vehiclesopened after NHTSA action (ODI)

NHTSA advisory: do not drive affected vehicles until repaired.

Problem: Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Fix: Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.

EquipmentMay 29, 2014

Equipment

Recall 14E02800082,579 vehiclesopened after NHTSA action (ODI)

Problem: Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
Risk: The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Fix: Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.

Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.

Crash test ratings

2008 Mercury Milan 4-DR. w/SAB (Later Release)

OverallNot Rated

Frontal crash	Not Rated
Side crash	Not Rated
Rollover	★★★★★
Rollover risk	9.2%

2008 Mercury Milan 4-DR. w/SAB (Early Release)

OverallNot Rated

Frontal crash	Not Rated
Side crash	Not Rated
Rollover	★★★★★
Rollover risk	9.2%

NHTSA 5-Star Safety Ratings (New Car Assessment Program). Ratings are comparable only between vehicles of similar size and weight, and ratings from 2011 on use tougher tests than earlier years. Photos: NHTSA.

Fuel economy

Milan

23mpg combined

City / highway	20 / 28 mpg
Fuel	Regular Gasoline

2.3 L · 4 cyl · Automatic 5-spd · Front-Wheel Drive · about $2,900/year to fuel

Milan

23mpg combined

City / highway	20 / 29 mpg
Fuel	Regular Gasoline

2.3 L · 4 cyl · Manual 5-spd · Front-Wheel Drive · about $2,900/year to fuel

Milan

21mpg combined

City / highway	18 / 26 mpg
Fuel	Regular Gasoline

3 L · 6 cyl · Automatic 6-spd · Front-Wheel Drive · about $3,200/year to fuel

Milan AWD

20mpg combined

City / highway	17 / 25 mpg
Fuel	Regular Gasoline

3 L · 6 cyl · Automatic 6-spd · 4-Wheel or All-Wheel Drive · about $3,350/year to fuel

EPA estimates from fueleconomy.gov for each engine and transmission sold. Annual cost is the EPA's estimate for 15,000 miles a year at its current fuel and electricity price assumptions. Your results will vary.

What owners report

Problem area	Complaints	Crashes	Fires	Injuries	Typical mileage*
Air bagsFrontal › Sensor/control module; Side/window	212	8	1	5	99,500 mi
Service brakes	178	14	1	4	100,000 mi
Vehicle speed control	19	3	0	0	61,750 mi
Service brakes, hydraulicPedals and linkages	18	1	0	0	109,000 mi
Power trainAutomatic transmission	17	0	0	0	80,000 mi
Engine	12	0	0	0	76,800 mi
StructureBody; Body › Door	11	2	1	1	60,725 mi
Unknown or other	10	1	0	0	83,438 mi
Electrical systemInstrument panel › Speedometer/odometer	6	0	0	0	110,000 mi
Wheels	5	2	0	0	25,000 mi
Steering	5	0	0	0	75,000 mi
TiresPressure monitoring and regulating systems	4	0	0	0	14,500 mi

*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.

Recent owner complaints

Service brakes
08 merc milan abs did not work and brakes failed almost causing major accidents. I used e brake to stop. Brakes went to floor. Been calling for and dealerships for recalls I find out now about abs malfunctioning noone will fix or get back to me. Leaking brake fluid all around abs module now. Dealerships saying they not fixing abs even on recalls. Ford dealership in East rutherford nj.
Apr 16, 2025
Engine
There is a problem with my tourqe converter with 100k miles. My car won't accelerate.
Feb 6, 2025
Tires
P205/60R16
Mar 29, 2024
Service brakes
The ABS brake function checked out during the recall window on Nov. 2 of 2021. The Ford dealer mechanics purged the brake system with fresh fluid and tested the function. Tested OK. The car was used without issue until recently and now the brake pedal goes down nearly to the floor before the brakes engage. It is shocking at first and once used to that the driver will pump the pedal twice for a firm pedal. A recent visit to a Ford dealer to diagnose the issue revealed that the recall is closed and that there is nothing they can do unless I pay the approximately $1000 to replace the ABS Hydraulic module. My complaint is that Ford customer service wants me to pay for this and then submit the…
Nov 20, 2023
Service brakes
Brakes are failing even after they have been serviced. Unsafe car to drive
Mar 31, 2023
Service brakes
The gas pedal gets stuck at the top when I go to press down on it allowing the car to keep driving when I am trying to stop the car.
Mar 31, 2023
Service brakes
Was not able to drive my car because you had to press the breaks all the way to the ground in order for the vehicle to attempt to stop. A recall was issued for the hydraulic breaks in 2019 and no parts were available for almost a year. Car has been at the dealership being repaired since August 12, but now they are telling us that the hydraulic breaks issues has caused the break master cylinder to fail - leaving the car unsafe and undrivable but they are expecting us to pay for the replacement of the master cylinder when the dealership openly admitted this was directly caused because of the recall
Oct 5, 2022
Air bags
In March 2021 I received important safety recall from Ford advising me that the Airbag inflator might explode in the event of a crash and may cause injury or death to the driver or passengers. My daughter still drives this car, why have they not followed up and replaced this part?
Jul 28, 2022

Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.

NHTSA defect investigations

Extended Braking DistanceClosedLed to recall 19V904000
On April 18, 2018, the Office of Defects Investigation (ODI) opened Engineering Analysis (EA) 18-002 to investigate reports of braking concerns in model year (MY) 2006-12 Ford Fusion and Lincoln MKZ, and MY 2006-11 Mercury Milan vehicles manufactured with Continental Automotive System?s ABS hydraulic control units (HCUs). Complainants report that after an ABS braking event (initiated by slippery or uneven surfaces) the brake pedal moved towards the floor and the vehicle stopping distance increased beyond driver expectations.Inside the HCU are four hydraulic normally closed (NC) valves with zinc-coated moving armatures that control the flow of brake fluid. Unstable brake fluid can degrade over time, allow the brake fluid to gel, and corrosion to form on the armatures. The high-viscosity gelation and corrosion can cause the armatures to become stuck (open). In some cases, braking returns…
EA18002 · opened Apr 18, 2018 · closed Jan 15, 2021
Extended Braking DistanceClosed
On December 20, 2016, the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 16-017 to investigate reports of braking concerns in model year 2007 through 2009 Ford Fusion and Mercury Milan vehicles.Complainants report that after an ABS braking event (caused by braking on a slippery or uneven surface) the brake pedal moved towards the floor and the distance in which the vehicle stopped increased beyond what was expected by the driver.The cause of the problem appears to be the Antilock Braking System (ABS) Hydraulic Control Unit (HCU), a component manufactured for Ford by Continental Automotive Systems.Hydraulic control valves within the HCU can experience corrosion and become stuck.In some cases, braking returns to normal when the valve(s) subsequently become unstuck.The intermittent condition proves difficult to diagnose and complainants report having several brake…
PE16017 · opened Dec 20, 2016 · closed May 4, 2018
Floor mat interference with acceleratorClosedLed to recall 14E028000
On May 27, 2014, Ford Motor Company submitted recall 14E-028 (Ford recall #14S07) to correct a safety-related problem with certain driver's side Ford optional all-weather floor mats sold for use in model year 2006 through 2011 model year Ford Fusion, Mercury Milan, Lincoln Zephyr, and Lincoln MKZ vehicles built at Hermosillo Assembly Plant (HAP) from November 9, 2007, to October 31 ,2010.NHTSA testing determined that the original accessory all-weather mat with a single retention clip (Figure 1), may interfere with accelerator pedal return to idle with the mat retained by the clip and rotated clockwise.Both the single- and double-clip (Figure 2) all-weather floor mats may interfere with the accelerator pedal return to idle when the mats are not secured by the retention clip(s).Testing showed that this can occur if the mats are moved forward from the clipped position approximately two…
EA12009 · opened Dec 12, 2012 · closed Jun 12, 2014
Accel Pedal Interference - Acc FloormatClosed
Unsecured mats may interfere with accelerator pedal return to idle. A heel blocker in the floor pan provides a platform that may lift an unsecured mat into contact with the pedal. Ford introduced new pedals as a running change early in model year (MY) 2010 vehicles. Analysis of complaints received by ODI and Ford show elevated rates of pedal entrapment incidents in MY 2008 through early 2010 production vehicles. Incidents typically occur following hard pedal applications to pass slower traffic or when merging into faster traffic. Drivers allege continued high engine power after releasing the accelerator pedal and difficulty braking, including reports that the incident was controlled by shifting to neutral or turning the engine off. Drivers and service technicians reference observing evidence of mat interference or note unsecured Ford or aftermarket all weather floor mats in…
PE10019 · opened May 28, 2010 · closed Jan 11, 2013
TIRE VALVE CRACKINGClosed
ON OCTOBER 14, 2008, ODI OPENED PE08-060 TO INVESTIGATE ALLEGATIONS OF CRACKED AND LEAKING SNAP-IN TIRE VALVES IN MODEL YEAR (MY) 2007 VEHICLES MANUFACTURED BY FORD MOTOR COMPANY.THE VALVES WERE SUPPLIED TO FORD BY TOPSEAL AUTO-PARTS, A SUBSIDIARY OF THE SHANGHAI BAOLONG AUTOMOTIVE CORPORATION IN CHINA.VALVES MADE BY TOPSEAL FOR AFTERMARKET SALE WERE THE SUBJECT OF TWO RECENT SAFETY RECALLS BY TECH INTERNATIONAL (08T-018) AND DILL AIR CONTROLS (08T-028), THE LATTER OF WHICH WAS INVESTIGATED BY ODI IN PE08-036 AND EA08-022.THE DEFECT CONDITIONS ADDRESSED BY THE AFTERMARKET TIRE VALVE RECALLS BOTH INVOLVED INADEQUATE RESISTANCE TO OZONE CRACKING DUE TO ISSUES WITH THE SUPPLY OF ANTI-OZONANT CHEMICALS TO TOPSEAL FOR A PERIOD FROM JULY TO MID-NOVEMBER 2006.THE AFTERMARKET VALVES WERE COMPOUNDED WITH A BLEND OF EPDM AND NATURAL RUBBER, USING A RELATIVELY LOW PERCENTAGE OF EPDM (EPDM PROVIDES…
PE08060 · opened Oct 14, 2008 · closed Apr 9, 2009