The 2014 Ford F-450 Sd has 4 safety recalls and 1 owner complaint on file with NHTSA. The most-reported problem area is engine (1 complaint).
Recalls4safety recalls
Complaints1filed by owners
Crashes · fires0 · 0reported in complaints
Injuries · deaths0 · 0reported in complaints
Safety recalls
Power train › Automatic transmission › Control module (tcm/pcm/tecm)
NHTSA recall 15V175000 · Mar 25, 2015 · 6,322 vehicles · opened after NHTSA action (ODI)
Problem: Ford Motor Company (Ford) is recalling certain model year 2011-2015 Ford F-350, F-450, and F-550 trucks manufactured February 22, 2010, to January 30, 2015, and equipped with ambulance or fire engine preparation packages. The affected vehicles may detect an incorrect Exhaust Gas Temperature Sensor (EGT) fault indicating that the vehicle is too hot, causing the engine management system to shut down the engine and prevent its immediate restart.
Risk: Engine shut down and a subsequent cool down period may delay medical treatment or assistance to those needing it, increasing their risk of injury.
Fix: Ford will notify owners, and dealers will update the Powertrain Control Module (PCM) software, free of charge. The recall began on April 22, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S09.
Suspension
NHTSA recall 15V024000 · Jan 22, 2015 · 4 vehicles · opened after NHTSA action (ODI)
Problem: Life Line Emergency Vehicles (Life Line) is recalling certain model year 2014-2015 Life Line-modified Ford F-Series emergency vehicles that are equipped with Liquid Spring-brand aftermarket suspension kits. The mounting bracket that attaches the suspension fluid tank to the frame may fail allowing the fluid tank to separate from the vehicle.
Risk: If the suspension fluid tank mount fractures and the tank separates from the chassis, the tank may become a road hazard, increasing the risk of a crash.
Fix: The remedy for this recall is still under development. The recall began on February 2, 2015. Owners may contact Life Line customer service at 1-563-578-3317.
Equipment
NHTSA recall 14V328000 · Jun 13, 2014 · 21 vehicles · opened after NHTSA action (ODI)
Problem: Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The recall is expected to begin in mid-July 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
Risk: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Fix: Iowa Mold Tooling Co., Inc. will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. The recall began on July 28, 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.
Equipment
NHTSA recall 14V327000 · Jun 12, 2014 · 10 vehicles · opened after NHTSA action (ODI)
Problem: Stahl is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Stahl and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.
Risk: The leaking oil may soak into the thermal blanket covering the exhaust, which when combined with heat from exhaust, may result in an increased risk of fire.
Fix: Stahl will notify owners, and dealers will install a new pressure switch kit that moves the switch away from the exhaust system, free of charge. Owners may contact Stahl customer service at 1-800-277-8245, or Muncie at 1-800-367-7867.
Recall repairs are free at any authorised dealer. A recall listed here may already have been fixed on a particular car: enter its 17-character VIN at nhtsa.gov/recalls to see open recalls.
What owners report
Problem area
Complaints
Crashes
Fires
Injuries
Typical mileage*
Engine
1
0
0
0
—
Fuel/propulsion system
1
0
0
0
—
*Median odometer reading when the problem happened, where owners gave one. One complaint can name several problem areas.
Recent owner complaints
May 5, 2016 · 74,000 milesEngine THE HIGH PRESSURE FUEL PUMP FAILED. FORD CLAIMED THAT THIS WAS FROM CONTAMINATED FUEL. FORD HAS TWO FUEL FILTERS AND A WATER SEPARATOR. I PERSONALLY ADDED TWO ADDITIONAL FILTERS AND AN ADDITIONAL WATER SEPARATOR, FOR A TOTAL OF FOUR FILTERS AND TWO SEPARATORS. FORD ALSO HAS A WATER IN FUEL LIGHT THAT IS SUPPOSED TO ALERT THE DRIVER TO CONTAMINATION. AT NO TIME DID THIS LIGHT COME ON. IN SHORT, I BELIEVE FORD HAS A DEFECTIVE FUEL PUMP AND A DEFECTIVE FILTRATION AND WATER ALERTING SYSTEM. THIS TRUCK SHUTDOWN, WITH NO WARNING AT 70 MPH ON A LIMITED ACCESS HIGHWAY. FORD REFUSES TO ADDRESS THE PROBLEM AND CONTINUES TO BLAME THE OWNER. THIS IS A SAFETY ISSUE AND I WAS FORTUNATE THAT THERE WAS…
Owner complaints are submitted to NHTSA by the public and are not verified. Shown as filed (NHTSA removes personal details); long reports are shortened.
NHTSA defect investigations
RQ14005 · opened Jan 13, 2015 · closed Mar 15, 2016 · led to recall 15V175000Vehicle Commanded Engine Shutdown The Office of Defects Investigation (ODI) opened this RQ to investigate allegations that the scope and remedy of safety recall 13V-535 were inadequate. Recall 13V-535 was limited to a relatively small population of Ambulance Package vehicles and ODI received complaints of pickup trucks and Fire Engine Prep Package vehicles being affected by the same defect. Ford manufactured approximately 555,985 subject vehicles between February 22, 2010 and January 30, 2015 that may be affected by defective EGT sensors and Powertrain Control Module (PCM) software calibration. The subject vehicles are equipped with four (4) EGT sensors to monitor engine operating conditions. An EGT sensor fault may produce false exhaust over-temperature signals. If these signals are produced, the Powertrain Control Module (PCM) implements a Failure Management Effects Mode (FMEM) and the driver receives a Stop Safely…