Desiccated Air Bag Inflator RuptureOpen
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled…
EA21002 · opened Sep 17, 2021Air Bag Inflator RuptureOpenLed to recall 14V668
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico,…
EA15001 · opened Feb 24, 2015Air Bag Inflator RuptureClosedLed to recall 13V172000
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico,…
PE14016 · opened Jun 11, 2014 · closed Mar 2, 2015Driver's Power Window Master SwitchClosedLed to recall 11V456000
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant.…
EA11004 · opened Apr 11, 2011 · closed Oct 24, 2012Driver's Master Power Window SwitchClosedLed to recall 11V456000
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening the investigation the Office of Defects Investigation (ODI) has received two additional reports.The reports provided by Honda in response to ODI's Information Request appear consistent with ODI's Vehicle Owner's Questionnaire reports. Based on the information provided by Honda in response to this preliminary evaluation and its ongoing analysis, the investigation will be upgraded to engineering analysis EA11-004 to further study the issue.
PE10047 · opened Nov 22, 2010 · closed Apr 15, 2011UNDERHOOD FIRESClosed
IN DOCUMENTS PROVIDED DURING EA04-027, HONDA IDENTIFIED A MECHANISM WHICH CAUSES THE RUBBER SEAL (GASKET) OF THE ORIGINAL EQUIPMENT (OE) OIL FILTER TO ADHERE TO THE ENGINE BLOCK OF THE SUBJECT VEHICLES.IF AN ADHERED SEAL REMAINS WHEN THE OE FILTER IS REMOVED AND A NEW FILTER IS INSTALLED, A DOUBLE GASKET CONDITION RESULTS.A SUBSEQUENT RUPTURE OF THE EXTRANEOUS SEAL CAN RESULT IN OIL CONTACTING NEARBY EXHAUST SYSTEM SURFACES AND A FIRE MAY OCCUR.THROUGHOUT ITS DISCUSSIONS WITH ODI, HONDA HAS MAINTAINED THAT IT IS THE SERVICING TECHNICIAN?S RESPONSIBILITY TO INSPECT FOR AND REMOVE THE SEAL PRIOR TO INSTALLING A NEW FILTER.ODI?S ANALYSIS FOUND THAT SEAL ADHESION, IN CONJUNCTION WITH TECHNICIAN ERROR AND EXHAUST COMPONENT LOCATION, RESULTED IN A HIGH RATE OF SUBJECT VEHICLE OIL FILTER FIRES COMPARED TO EARLIER MODELS AND PEERS.VEHICLES THAT HAVE NOT HAD THE OE FILTER DISTURBED ARE NOT AT…
EA04027 · opened Sep 9, 2004 · closed Jan 19, 2005